P0121 Audi Code – Throttle/Pedal Position Sensor/Switch ‘A’ Circuit Range/Performance

Possible Causes

Faulty throttle position sensor
Throttle position sensor harness is open or shorted
Throttle position sensor circuit poor electrical connection
Faulty Engine Control Module (ECM)

الأسباب المحتملة

وضع الخانق الخانق وضع مستشعر مستشعر SensorTrottle هو فتح أو مختصرة دائرة مستشعر مستشعر وحدة التحكم الكهربائية الفقيرة في محرك ConnectionFaulty Module (ECM)

Possible Symptoms

Engine Light ON (or Service Engine Soon Warning Light)

الأعراض المحتملة

ضوء المحرك (أو خدمة محرك قريبا ضوء تحذير) ضوء)

Description

The throttle position sensor (TPS) responds to the accelerator pedal movement. This sensor is a kind of potentiometer which transforms the throttle position into output voltage, and emits the voltage signal to the Engine Control Module (ECM). In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ECM.
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.

الشرح

يستجيب مستشعر وضع الخانق (TPS) لحركة دواسة المسرع. هذا المستشعر هو نوع من مقياس الجهد الذي يحول موضع الخانق إلى جهد الإخراج ، وينبعث إشارة الجهد إلى وحدة التحكم في المحرك (ECM). بالإضافة إلى ذلك ، يكتشف المستشعر سرعة فتح وإغلاق صمام الخانق ويغذي إشارة الجهد إلى موضع ECM.Idle لصمام دواسة الوقود بواسطة ECM الذي يتلقى الإشارة من مستشعر وضع الخانق. يتحكم هذا المستشعر في تشغيل المحرك مثل قطع الوقود. من ناحية أخرى ، لا يستخدم مفتاح وضع الخانق المفتوح والمغلق على مصراعيه ، والذي تم دمجه في وحدة مستشعر وضع الخانق ، للتحكم في المحرك.

Related Posts

Leave a Reply

Your email address will not be published.