P0267 BMW Code – Cylinder 3 Fuel Injector Circuit Low

Possible Causes

Dirty Fuel Injector 3
Faulty Fuel Injector 3
Plugged Fuel Injector 3
Fuel injector 3 harness is open or shorted
Fuel injector 3 circuit poor electrical connection

الأسباب المحتملة

حاقن الوقود القذر 3 حاقن الوقود المعيب 3 حاقن وقود 3fuel enjector 3 تسخير مفتوح أو مختصر لحاقن الوقود 3 اتصال كهربائي فقير

Possible Symptoms

Engine Light ON (or Service Engine Soon Warning Light)
Engine Misfire
Engine Run Rough
Low MPG

الأعراض المحتملة

ضوء المحرك على (أو خدمة محرك قريبا ضوء تحذير) المحرك Misfireengine تشغيل Roughlow MPG

Description

This fault code is stored in the Engine Control Module (ECM) when the injector control circuit does not behave as expected. The ECM uses the induced voltage from the injector to indicate that the fuel injector circuit is operating correctly electrically. It does not signal the mechanical condition of the injector. When the ECM opens the ground circuit for an injector, to cease current flow, a voltage is induced into the winding. This voltage shows the electrical integrity of the injector and associated wiring. Absence of this induced voltage results in a fault code being stored in the ECM.

الشرح

يتم تخزين رمز الخطأ هذا في وحدة التحكم في المحرك (ECM) عندما لا تتصرف دائرة التحكم في الحاقن كما هو متوقع. يستخدم ECM الجهد المستحث من الحاقن للإشارة إلى أن دائرة حاقن الوقود تعمل بشكل صحيح كهربائيًا. لا يشير إلى الحالة الميكانيكية للحاقن. عندما يفتح ECM الدائرة الأرضية للحاقن ، لوقف التدفق الحالي ، يتم إحداث الجهد في اللف. يوضح هذا الجهد السلامة الكهربائية للحاقن والأسلاك المرتبطة بها. يؤدي غياب هذا الجهد المستحث إلى تخزين رمز الخطأ في ECM.

Related Posts

Leave a Reply

Your email address will not be published.