Possible Causes
Faulty Ignition/Distributor engine speed sensor
Ignition/Distributor engine speed sensor harness is open or shorted
Ignition/Distributor engine speed sensor circuit poor electrical connection
Faulty Crankshaft Position sensor
Low battery charge
Faulty Engine Control Module (ECM)
الأسباب المحتملة
Possible Symptoms
Engine Light ON (or Service Engine Soon Warning Light)
Lack/Loss of Power
The engine may be harder to start
The engine may stumble or stall
الأعراض المحتملة
Description
Ignition failure sensor is used to check whether the spark ignition is occurred correctly or not and also used to tachometer drive. The sensor monitors the voltage difference between a resistance which is on the battery circuit for ignition coil. When the ignition coil works properly, the electric current through the resistance is detected as voltage drop. This is confirmed for every ignition event with the crankshaft sensor and the camshaft sensor. If ECM detects a malfunction, no ignition is possible, so the engine would not start. If there is no ignition signal for a predetermined cycle for one or two ignition coils, an ignition coil circuit failure exists.
