P0410 Audi Code – Secondary Air Injection System-Pump Relay Fault

Possible Causes

Faulty Vacuum hoses damaged
Faulty Air Pump inoperative
Air bypass solenoid harness is open or shorted
Air bypass solenoid circuit poor electrical connection
Air bypass solenoid leaking/blocked or stuck open/closed
Air diverter valve leaking/blocked or stuck open/closed

الأسباب المحتملة

خراطيم الفراغ الخاطئة مضخة الهواء التالفة في الهواء الطلق ، تسخير الملف اللولبي ، أو مختصر ، أو ممرات الملف اللولبي الفقير ، والتوصيل الكهربائي الالتفافية ،

Possible Symptoms

Engine Light ON (or Service Engine Soon Warning Light)
Engine hesitation

الأعراض المحتملة

ضوء المحرك على (أو خدمة محرك قريبا ضوء تحذير) تردد المحرك

Description

An air pump is used on the vehicle to lower tail pipe emissions on start-up. The Powertrain Control Module (PCM) grounds the Air pump relay control circuit which energizes the Air pump. The PCM also grounds the Air combination valve vacuum control solenoid circuit, which energizes the Air vacuum control solenoid. Vacuum is then applied to both Air combination valve diaphragms which opens the shut off valves. The PCM enables both circuits simultaneously when Air system operations id desired. When the AIR system is active, then Air pump forces fresh air into the exhaust stream in order to accelerate catalyst operation. The AIR combination valves replace the conventional check valves. When the AIR system is inactive the shut off valves prevent air flow in either direction.

الشرح

يتم استخدام مضخة الهواء على السيارة لخفض انبعاثات أنابيب الذيل عند بدء التشغيل. تضع وحدة التحكم في مجموعة نقل الحركة (PCM) دائرة التحكم في ترحيل مضخة الهواء التي تنشط مضخة الهواء. يضع PCM أيضًا دائرة الملف اللولبي للسيطرة على Valve Collve Air ، والتي تنشط الملف اللولبي للتحكم في فراغ الهواء. ثم يتم تطبيق الفراغ على كلا الحجاب الحاجز الصمام الجوي الذي يفتح صمامات الإغلاق. يتيح PCM كلا الدائمين في وقت واحد عند رغبة معرف عمليات نظام الهواء. عندما يكون نظام الهواء نشطًا ، فإن مضخة الهواء يفرض الهواء النقي في تيار العادم من أجل تسريع تشغيل المحفز. صمامات تركيبة الهواء تحل محل صمامات الفحص التقليدية. عندما يكون نظام الهواء غير نشط ، فإن صمامات الإغلاق تمنع تدفق الهواء في أي من الاتجاهين.

Related Posts

Leave a Reply

Your email address will not be published.