Possible Causes
Faulty Battery Condition Monitor Module
Battery Condition Monitor Module harness is open or shorted
Battery Condition Monitor Module circuit poor electrical connection
الأسباب المحتملة
Possible Symptoms
Engine Light ON (or Service Engine Soon Warning Light)
الأعراض المحتملة
Description
The battery control processor is in the battery condition monitor module. The controller area network (CAN) transmits/receives pulsing signals to/from the control modules simultaneously by using two signal lines (F-CAN A_H and F-CAN A_L) and (EPP-CAN_H and EPP-CAN_L). The F-CAN and the EPP-CAN sends same data. If the F-CAN or the EPP-CAN does not transmit/receive data, the normal signal line can transmit/receive data. If the F-CAN and the EPP-CAN does not transmit/receive data, the battery condition monitor module cannot run normally. The battery condition monitor module detects no signal, received data is abnormal or BUS-OFF is received via the F-CAN and EPP-CAN, the battery condition monitor module detects a malfunction and stores a DTC.
