Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s)
Check for more codes
Faulty Control Module
Control Module harness is open or shorted
Control Module circuit poor electrical connection
Engine Light ON (or Service Engine Soon Warning Light)
Multiplexing is a method of sending 2 or more signals simultaneously over a single circuit. Multiplexing allows 2 or more electronic modules (nodes) to communicate over a twisted wire pair [data (+) and data (-)] network. The information or messages that can be communicated on these wires consists of commands, status or data. Multiplexing reduces the weight of the vehicle by reducing the number of redundant components and electrical wiring. The vehicle has 4 module communication networks connected to the DLC, located under the instrument panel. The communication networks are: HEV High Speed Controller Area Network (HS-CAN), High Speed Controller Area Network (HS-CAN), Medium Speed Controller Area Network (MS-CAN) and Infotainment Controller Area Network (I-CAN). The Diagnostic Trouble Code (DTC) U0013 sets when a Medium Speed Controller Area Network (MS-CAN) fault is either currently present or was present at a point in time. The BCM can report this DTC while a fault is present because the BCM communicates with the scan tool on the High Speed Controller Area Network (HS-CAN).