Diagnosis of this Diagnostic Trouble Code (DTC) is accomplished via the vehicle symptom(s)
Check for more codes
Faulty Control Module
Control Module harness is open or shorted
Control Module circuit poor electrical connection
Engine Light ON (or Service Engine Soon Warning Light)
A Controller Area Network (CAN) is a vehicle bus standard designed to interconnect automotive devices without a host computer. Operating information and commands are exchanged among the devices. The devices have programmed information about what messages are needed to be exchanged on the serial data circuits. CAN bus uses two dedicated wires for communication. The wires are called CAN high and CAN low. When the CAN bus is in idle mode, both lines carry 2.5V. When data bits are being transmitted, the CAN high line goes to 3.75V, and the CAN low drops to 1.25V, thereby generating a 2.5V differential between the lines. Since communication relies on a voltage differential between the two bus lines, the CAN bus is NOT sensitive to inductive spikes, electrical fields, or other noise. The Diagnostic Trouble Code (DTC) sets when a supervised periodic message that includes the transmitter device availability has not been received.