Faulty Hybrid/EV Powertrain Control Module 2
Hybrid/EV Powertrain Control Module 2 harness is open or shorted
Hybrid/EV Powertrain Control Module 2 circuit poor electrical connection
Faulty Body Control Module (BCM)
Engine Light ON (or Service Engine Soon Warning Light)
The serial data circuit is the means by which the devices in the vehicle communicate with each other. Once the scan tool is connected to the serial data circuit through the Data Link Connector (DLC), the scan tool can be used to monitor each device for diagnostic purposes and to check for Diagnostic Trouble Code (DTC). When the vehicle is ON, each device communicating on the serial data circuit sends a state of health message to ensure that the device is operating properly. When a device stops communicating on the serial data circuit, for example, if the device loses power or ground, the state of health message it normally sends on the serial data circuit disappears. Other devices on the serial data circuit, which expect to receive that state of the health message, detect its absence; those devices in turn set a DTC associated with the loss of the state of health of the non-communicating device. A loss of serial data communications DTC does not represent a failure of the devices that contain the stored DTC. The DTC will set when a supervised periodic message that includes the transmitter device availability has not been received.